Before Beginning
Setup Procedures
Connect
Help

Before Beginning:

• Read Wireless Access.
• Know your computer login userID and password.
  Students: This is the userid and password you enter when logging into your student email account or a campus open-access lab. If you do not know yours, visit http://www.student.gsu.edu/ for assistance.
  Faculty/Staff: This is your Novell userid and password.
• You must have a Wireless Network Card properly installed on your Pocket PC.

Setup Procedures:

Step 1. Configure Your Wireless Network Card for the Georgia State Wireless Network.

1. Insert the wireless network card, and then turn on the Pocket PC.
2. Go to Start.
3. Select Programs.
4. Select the appropriate program for your wireless card, and click the icon.
5. Click Configuration.
6. Click Network SSID:
   1. Enter CatChat and press Enter.
   2. Click Apply.
7. Press IP Configuration and verify that either IP address, or DHCP, is checked.
   This confirms that you have a server-assigned IP address.

Step 2. Verify Connectivity to the Wireless Network.

Confirm that you can reach the wireless network. You must be able to reach the network - in general - before you can attempt to create a personal login session with your userid/password.

1. Open a Browser.
2. Type in wireless.gsu.edu and press Enter.
   If you see Welcome to the GSU Wireless Network you are connected. If not, close the browser and try reconfiguring your wireless card.

Connect:

Establish a personal connection to the wireless network by authenticating your userid/password through a Web Browser.

1. Open a Browser.
2. Enter your userid and password, and then press Enter.
   You are connected to the wireless network.

Help:

If you have questions, or need assistance, please contact the Help Center (404-651-4507 or help@gsu.edu). Students may also visit http://www.student.gsu.edu/.